Products > Mica Band Heaters > Standard Mica Band Heaters > Lead Config w/Straps

band heaters standard configurations

Band Heaters – Lead Configuration with Straps

 

Typical lead configurations have the leads near the gap for efficiency of heat distribution. If you need the leads exiting at another location such as opposite the gap or any other location, please call customer service because it’s easy for Thermal to manufacture exactly the band heater you are looking for.

 

Configuration 500

  • One-piece band heater with flexible leads with stainless steel overbraid and  separate strap.
  • Diameters from 1″ to 15″,  Widths from 1″ to 10″

heater bands

 

 

 

Configuration 501

  • Two-piece mica band heater, flexible leads with stainless steel overbraid and separate strap. When specifying wattage and voltage, give wattage & voltage for each individual half.
  • Diameters from 2″ to 30″, Widths from 1″ to 10″

heater bands

 

 

 

Configuration 550

  • One-piece mica band heater, flexible leads (no metal overbraid) and separate strap.
  • Diameters from 1″ to 15″,  Widths from 5/8″ to 10″

band heaters

 

 

 

Configuration 551

  • Two-piece mica band heater, flexible leads (no metal overbraid) and separate strap. When specifying wattage and voltage, give wattage & voltage for each individual half
  • Diameters from 2″ to 30″,  Widths from 5/8″ to 10″

band heaters

 

 

 

Configuration 516

  • One-piece mica band heater,  flexible leads with stainless steel overbraid and separate strap.
  • Diameters from  1 1/2″ to 15″,  Widths from 1″ to 5″
  • For widths 5″ to 10″, specify  configuration 546.

mica band heaters

 

 

 

Configuration 546

  • One-piece mica band heater, flexible leads with stainless steel over braid and separate strap. Same as configuration 516 except with folded ends.
  • Diameters from 3″ to 14″,  Widths from 2″ to 10″

mica band heaters

 

 

 

Configuration 517

  • Two-piece mica band heater, flexible leads with stainless steel overbraid located at one end of each half, separate clamping straps. When specifying wattage and voltage, give wattage & voltage for each individual half.
  • Diameters from 3″ to 30″, Widths from 1″ to 5″
  • For widths 5″ to 10″, specify  configuration 547.

mica band heaters

 

 

 

Configuration 547

  • Two-piece mica band heater, flexible leads with stainless steel overbraid located at one end of each half, separate clamping straps. When specifying wattage and voltage, give wattage & voltage for each individual half.
  • Diameters from 4″ to 28″, Widths from 2″ to 10″

nozzle band heaters

 

 

 

Configuration 536

  • One-piece, expandable band heater  (made as a one-piece heater, but notched and designed to be bent open to fit over a cylinder, then bent closed), flexible leads with stainless steel overbraid locate on one end, separate strap.
  • Diameters from 2 1/2″ to 15″, Widths from 1″ to 5″

nozzle band heaters

 

 

 

Configuration 514

  • One-piece mica band heater,  flexible leads with stainless steel hose and separate strap.
  • Diameters from  1 1/2″ to 15″,  Widths from 1″ to 5″
  • For widths 5″ to 10″, specify  configuration 544.

nozzle band heaters

 

 

 

Configuration 544

  • One-piece mica band heater, flexible leads with stainless steel hose and separate strap. Same as configuration 514 except with folded ends.
  • Diameters from 3″ to 14″,  Widths from 2″ to 10″

nozzle band heaters

 

 

 

Configuration 515

  • Two-piece mica band heater, flexible leads with stainless steel hose and separate strap. When specifying wattage and voltage, give wattage & voltage for each individual half.
  • Diameters from 3″ to 30″, Widths from 1″ to 5″
  • For widths 5″ to 9″, specify  configuration 545.

band heaters standard configurations

 

 

 

Configuration 545

  • Two-piece band heater, flexible leads with stainless steel hose and separate strap.  Same as Configuration 515 except with folded ends. When specifying wattage and voltage, give wattage & voltage for each individual half.
  • Diameters from 4″ to 28″, Widths from 2″ to 10″

band heaters standard configurations

 

 

 

Configuration 538

  • One-piece, expandable mica band heater (made as a one-piece heater, but notched and designed to be bent open to fit over a cylinder, then bent closed), flexible leads with stainless steel hose locate on one end, separate strap.
  • Diameters from 2 1/2″ to 15″, Widths from 1″ to 5″

BH-538_b